H200M Features and Benefi ts
2.0" Inlet & Outlet provides higher service fl ows with less
pressure drop
12-Volt Operation AC or DC
Electronic Meter Demand with Calendar Day Override
Scrolling User Screen shows capacity remaining, time of
day and fl ow rate
12-Volt Relay Driver allows multiple dry contact signals
Service Interval Screen reminds you to call for
preventative maintenance service
Differential Pressure Switch Capability
Fully Programmable Cycle Position and Times
Nine Cycle Control
Soft Water Brine Tank Re-Fill
Multiple Backwash and Rinse Capabilities
Quiet Operation
Variable Reserve automatically adjusts to changing water
usage patterns.
Several programming options including: variable reserve,
fi xed reserve, calendar day override, delayed or immediate
regeneration.
Diagnostics
Going Green
–Days since last regeneration
–Gallons since last regeneration
Brine Reclaim – The H200M standard electronic pack-
–Gallon reserve capacity last 7 days
age is capable of reclaiming up to 30% of the salt used
–63 Days history of daily totals usage
in regeneration for the next regeneration. Salt savings
–Maximum fl ow rate for the last seven days
will vary depending on the lbs. of salt per cubic foot of
–Total number of regenerations
resin used to regenerate. A brine reclaim kit is required
–Total days in service
for this option.
–Total gallons processed
Permanent memory backup of all programming
Water Reclaim – The H200M standard electronic
2-1/2 years Time of Day Backup
package is capable of reclaiming much of the water
Uses less than $2 of electricity per year
used to regenerate the water softener and re-use that
water to fl ush toilets. This water is typically soft and
System Designs Options
Meter Accuracy
is free of the salt/brine discharge which is diverted to
Single
1.5” Meter 0.5 – 75 gpm
your standard drain/waste system. A water reclaim kit
Parallel Operation
2” Meter 1.5 – 150 gpm
is required for this option.
Twin Alternating
Accuracy: ±5%
Demand Recall - Up to six units
No Raw Water Bypass
Alternate Source Regeneration
Specifi cations
FLOW
PEAK FLOW
BACK
BRINE TANK 1
DEMAND
CAPACITY
RATE
RATE
WASH
MINERAL
TANK
SALT
MODEL
MINERAL
LOW SALT
MED. SALT
HIGH SALT
@
@
RATE
TANK
SIZE
STORAGE
NAME
CU. FT.
GRAINS/LBS.
GRAINS/LBS.
GRAINS/LBS.
15 PSI
25 PSI
GPM
(INCHES)
(INCHES)
(POUNDS)
H200M-60
2
38,000/12
56,000/20
64,000/30
38
49
4.2
13x54
18x40
330
H200M-90
3
57,000/18
84,000/30
96,000/45
39
50
4.2
14x65
18x40
300
H200M-120
4
76,000/24
112,000/40
128,000/60
47
60
5.3
16x65
24x41
640
H200M-150
5
95,000/30
140,000/50
160,000/75
53
69
7.5
18x65
24x50
750
H200M-150-21
5
95,000/30
140,000/50
160,000/75
72
94
9.0
21x62
24x50
750
H200M-180
6
114,000/36
168,000/60
192,000/90
51
66
7.5
18x65
24x50
750
H200M-180-21
6
114,000/36
168,000/60
192,000/90
70
91
9.0
21x62
24x50
750
H200M-210
7
133,000/42
196,000/70
224,000/105
66
85
9.0
21x62
24x50
710
H200M-240
8
152,000/48
224,000/80
256,000/120
76
98
13.0
24x72
24x50
680
H200M-270
9
171,000/54
252,000/90
288,000/135
74
96
13.0
24x72
24x50
678
H200M-300
10
190,000/60
280,000/100
320,000/150
73
94
13.0
24x72
24x50
641
H200M-300-30
10
190,000/60
280,000/100
320,000/150
89
115
20.0
30x72
24x50
641
H200M-450
15
285,000/90
420,000/150
480,000/225
84
109
20.0
30x72
30x50
1259
H200M-600
20
380,000/120
560,000/200
640,000/300
93
119
30.0
36x72
39x48
1640
H200M-750
25
475,000/150
700,000/250
800,000/375
98
127
40.0
42x72
42x60
2580
H200M-900
30
570,000/180
840,000/300
960,000/450
96
123
40.0
42x72
50x60
4130
H200M-1200
40
760,000/240
1,120,000/400
1,128,000/600
98
127
50.0
48x72
50x60
3940
1 Suggested brine tank size with grid plate option.
Product improvement designs are subject to change without notice .
Refer to Bulletin 2050 “Flow Rates and Soft Water Quality (Hardness Leakage) if your application requires that levels of hardness leakage do not exceed “x” .
, Inc.
DEALER NAME:
404 Moravian Valley Road
Waunakee, WI 53597
www..com
106682
11/4/14-LBRY